Industry News
Safety precautions for the daily operation of an efficient open oven:
日期：2021-10-11With the development of technology, polymer composite materials can now be used to deal with the above problems, and the more experienced Meijiahua technology system is used. The material has good adhesion and compressive strength, which can avoid disassembly and field correction of coating machine wear. At the same time, because of its concessional nature of metal shortage, it can well absorb the shock and vibration of the device and avoid secondary wear.
日期：2021-10-11The functional characteristics and wear treatment of the coating machine: 1. The whole coating machine is controlled by 4 frequency conversion motors, and the tension of the whole machine (coating, oven, traction, winding) is controlled by the floating arm to improve the reliability of the tension of the whole machine .
日期：2021-09-281. Turn on the power 1. Turn on the electrical insulation switch (set in front of the electrical control cabinet), press the EMERCENCY STOP RESET and READY TO RUN buttons, and press the buttons to input voltage 380V from MACHINE to RUN (main console), the current is correct and stable 2. Turn on the power switch of the hydraulic system installed on the main hydraulic drive bracket, and check whether the oil level and pressure gauge of the main hydraulic drive system are correct and stable. 3. Open the air gate valve (the suction pipe set under the air control cabinet), check whether the air pressure is correct) when it is stable above 6.0bar.
日期：2021-09-28With the development of industry, slitting machines are widely used in all walks of life. I believe that many friends have encountered the problem that the width of the strip is not accurate enough during the cutting process of the slitting machine equipment, which affects the accuracy of the width of the slitting machine. What are the factors of degree? , the following editor will take you to understand the crux of the problem.
日期：2021-09-16There are many kinds of products produced by coating processing. There are coating technology shadows from consumer goods to cutting-edge technology. Especially when producing high-precision coating products, it is necessary to carry out high-quality and high-quality coating technology. Here we focus on Three common precision coating process characteristics are introduced for comparison, for reference of coating engineers.
日期：2021-09-16Today, I will share with you that the film slitting machine is composed of an unwinding mechanism, a cutting mechanism, a winding mechanism, various functional rollers, and a tension control rectification control and detection device.
日期：2021-09-08With the increasing degree of mechanization, the requirements for the efficiency of winding operations are also increasing. When the slitting machine is used in the slitting operation of film, tape and paper, the whole roll of large reel can be divided into multiple small reels according to different requirements to meet the needs of different occasions, and in die-cutting coating The industry has a wide range of applications. The following editors share a little knowledge of the operation and maintenance of the slitting machine:
日期：2021-09-08In our daily die-cutting production operations, we often encounter the problem that materials need to be classified and cut. So what problems will there be in the actual slitting process? What should we do to deal with these problems? Below, the editor will interpret and analyze some common problems encountered in the daily cutting process with you;
日期：2021-08-30The experimental coating does not want to roll over, and these points cannot be ignored by scraping! Have you ever experienced a rollover during your experimental coating process? Take a look at the "difficult and miscellaneous diseases" in the experimental coating process. How did the technical experts break the work? The experimental coating seems to be very simple, a stick or a scraper scrapes off the film and there is a film. However, the coating effect and coating precision required by the experiment often fail to achieve the expected ideal state due to operational errors, conditions or limitations.
日期：2021-08-30The processing precision of the slitting machine is even more in high demand. For the plane, it is necessary to use an ultra-fine plane grinding machine, which is ground by a special grinding method, and is subject to strict quality control to ensure the thickness of all products. When we all slit the slitting machine, what slitting methods of the slitting machine do we generally use? What are the cutting methods? Below I will explain everything to you all!
日期：2021-08-20Why should the protective film be cut? Today, I will discuss with you the purpose of protective film slitting and the common problems of protective film slitting and winding.
日期：2021-08-20
Mobile terminal
Address：No. 151, Daxing Road, Dongping, Dongguan City
URL：m.weiboshouyi.com
landline：+86-769-86723139
Fax：+86-769-86736139
After-sales service line：0769-86738139致電總機轉(zhuǎn)808
E-mail：dadaozg2019@163.com
Domestic business：0086-769-86780883
international trade：0086-769-86780883轉(zhuǎn)886/887/882
Consulting